Kee Safety
Kee Safety safety gates, lifelines, walkways and guardrails to secure access and movement at height.
Kee Safety safety gates, lifelines, walkways and guardrails to secure access and movement at height.
Kee Gate® is a robust, fully adjustable self-closing safety gate designed to protect ladder openings, stair access points, roof hatches, elevated walkways and areas around industrial machinery. Available in single-width (openings up to 1m) or double-width (up to 1.8m) versions, it fits onto round or square tube via universal mounting clamps, or bolts directly to a wall surface. The spring-loaded mechanism automatically closes the gate behind the user, eliminating the human-error risk associated with chains or sliding bars. It complies with EN 1090, EN 14122-3:2016, EN 13374 and OSHA regulations, and has passed salt-spray corrosion testing (ASTM B117) plus over 50,000 open/close cycles.
Typical use : Securing access to a caged ladder or roof hatch at a warehouse or industrial site, allowing maintenance staff through while the spring-loaded closing action prevents any accidental fall once the gate is released.
Kee Line® is a horizontal lifeline system engineered to give workers freedom of movement on a rooftop while remaining continuously attached to a secure anchor point. Suitable for flat, pitched or standing-seam roofs and for concrete, steel, brick or masonry structures, it can be installed as a structural system (tied back directly to the building frame) or as a non-penetrating system using weighted posts (Wireanka) that avoid puncturing the roof membrane. The system incorporates an energy-absorbing feature to reduce fall-arrest forces, supports a maximum span of 12m for up to 3 simultaneous users, and is engineered via a proprietary configurator that validates building loads. Galvanised and stainless-steel components provide strong corrosion resistance, important in humid tropical climates.
Typical use : Installing a lifeline across the flat roof of an industrial or logistics building to secure recurring HVAC, waterproofing or telecom maintenance work, without penetrating the existing roof covering.
Kee Walk® is a modular, level, anti-slip walkway system designed to provide safe rooftop access while protecting the roof surface from foot-traffic damage. Supplied in pre-assembled 1.5m or 3m sections, it adapts to trapezoidal, profile, composite or standing-seam metal roofs, as well as flat, barrel or sloping roofs up to 35°. Glass-reinforced nylon, aluminium or GRP treads provide fire resistance (UL94 Class HB rating) and strong slip resistance, while aluminium support beams are fixed to the roof without welding. The system can be paired with a guardrail or a Kee Line lifeline for complete collective or personal fall protection, and is CE marked under EU Construction Products Regulation 305/2011 as well as EN 516:2006.
Typical use : Creating a clearly marked, safe walking route across the metal roof of an industrial or logistics facility to guide technicians toward HVAC units or technical equipment, while preventing damage to the metal roof sheeting.
Kee Guard® is the industry-leading modular guardrail system for permanent, collective roof-edge fall protection. Available as a free-standing, non-penetrating system (up to 10° roof pitch, suitable for concrete, asphalt, PVC or membrane roofs) or as a Top Fix version for metal profile and standing-seam roofs up to 45°, it assembles without welding using just a torque wrench or hex key. The hot-dip galvanised finish resists corrosion with minimal maintenance; an aluminium option is available for harsher environments. Free-standing installations are wind-load calculated for the specific site, and the system is available in RAL colour finishes on request. Kee Guard meets EN ISO 14122-3, EN 13374 Class A, and OSHA 29 CFR 1910.23 and 1926.501/502 requirements.
Typical use : Permanent, non-penetrating edge protection around the perimeter of a concrete flat roof at a commercial or industrial building, giving maintenance crews safe access without compromising the roof's waterproofing or its warranty.
Invented in 1934, Kee Klamp® is a modular tubular fitting system for building weldless, thread-free handrails, safety barriers and guardrails. The hot-dip galvanised cast-iron fittings, manufactured to BS EN ISO 1461 and TÜV certified, clamp onto BS EN 10255 steel tube using a simple hexagon set screw, allowing fast on-site assembly, modification or repair without specialised tools. Each fitting (sizes 5-9) supports a 900kg axial load per grub screw torqued to 39 Nm, and the galvanised finish delivers over 30 years of outdoor service life. The system accepts toeboards, infill panels and integrated gates, and exceeds EN and OSHA requirements.
Typical use : Building perimeter guardrails around tanks, technical platforms or walkways at a factory or treatment plant, with the ability to later reconfigure the layout on site without any welding.
Describe your needs, and we'll get back to you with a tailored proposal.